Just a few things that can be shared. IF you use them, drop me a note of thanks and give a little credit. 🙂
EME / NWT R3.S Enclosure
Enclosure for the R3.S. Replaces the standard enclosure. Allows for accessing the R3 PCB and DIP switches while the unit is mounted. Designed for M4 hardware and requires (4) M4 screws to fasten to your mounting bracket. You will have to come up with your own mounting plate. Also requires (2) M4 heat set inserts for securing the cover to the base housing. Ruthex inserts recommended.
For my K75 Dash conversion on Project Red, here is the design document:
And if you want to have a CNC shop build yours, these are the step files I created.
I used PCBWay for mine and with Aluminum 6160 and the finish options I chose, the set was just over $180.
Electrics
While I started with the custom diagram from NWT for my project which was great, I wanted a more accurate render of the resulting wiring on the bike. If you are doing a similar build with an R21 system, this, along with my Project RED posts may be of some help.
Adapters for Moto.blaze pin indicators and wrench STL files. Works with 2021 R9T
Motor Stand
Version 1. Quarter Inch Mild Steel. Can be used via SendCutSend.